Cranes & General Engineering

 



Top Braced Jib Cranes

Introducing our range of slab mounted, top braced jib cranes. Top braced cranes are the more economical option when height clearance is not an issue. Where hook height needs to be maximised, see our range of under-braced jib cranes here.
(you can also click on the navigation boxes on the right for the three types of jib cranes)

These cranes feature a large base so that they can be mounted via Chemset® bolts to existing factory floors without the need to pour special concrete footings*. Slew angle = 270 degrees min.



*Minimum slab thickness: 150mm
Minimum slab strength: 25MPa

For greenfeild projects, these cranes are also available with smaller bases for standard J-bolt footings




 





  

   
Capacity B A C D E V M
[kg] [m] [mm] [m] [mm] [mm] [kN] [kNm]
125 2 229 3.5 3920 400 4.00 4.56
3 229 3.5 3920 400 4.22 6.83
4 229 3.5 3920 400 4.45 9.32
5 257 3.5 4120 600 5.12 12.11
6 257 3.5 4120 600 5.34 15.12
250 2 229 3.5 3920 400 6.21 8.44
  3 277 3.5 3920 600 6.41 12.52
  4 277 3.5 4120 600 6.73 16.66
  5 277 3.5 4120 600 7.46 21.01
  6 322 3.5 4120 600 7.50 25.62
500 2 277 3.5 4120 600 9.32 15.31
3 277 3.5 4120 600 10.05 22.16
4 322 3.5 4410 600 10.12 29.42
5 322 3.5 4725 900 12.03 37.35
6 338 3.5 4725 900 12.66 45.20
1000 2 302 3.5 4120 900 15.99 29.75
  3 322 3.5 4420 900 17.56 43.00
  4 338 3.5 4340 900 18.30 56.88
  5 403 3.5 4725 * 19.63 71.39
  6 403 3.5 4725 * 21.81 87.29
1500 2 338 3.5 4420 900 24.05 45.10
3 363 3.5 4420 900 24.92 64.87
4 403 3.5 4725 * 27.37 86.01
5 403 3.5 4725 * 28.15 107.47
6 449 3.5 4725 * 29.43 129.63

* Not recommended for slab mounted via chemical fasteners - use footing with cast in J- bolts.
Contact CraneAid for specifications